The workhorse
Full ProXzir
Full-strength zirconia rated at 1,400 MPa, milled as one solid piece. No porcelain, so nothing to chip or delaminate under load.
Ideal for: posteriors, heavy bruxers, and the molar that already broke something once.
ProXzir™
Send your CaseOur own zirconia
ProXzir™. Zirconia we trust enough to warranty for life.
Rated at 1,400 MPa and milled in our own lab, in four tiers from full-strength posteriors to hand-layered anterior esthetics. One material family, one shade standard, one lab responsible for it all.
ProXzir zirconia at a glance
1,400 MPa flexural strength
Above typical full-strength zirconia.
Lifetime warranty
On every ProXzir restoration.
Our own material
Milled and quality-controlled in our lab.
IdentCeram certified
FDA-listed yttrium zirconia.
Prescribe by case
From a single veneer to a full hybrid arch.
The four ProXzir tiers
Esthetics, still monolithic
Multilayered Zirconia
Milled from a pre-shaded multilayer block, so shade and translucency graduate naturally from gingival to incisal. Monolithic chip-resistance, far more lifelike.
Ideal for: esthetic anterior and premolar crowns without layered porcelain.
Esthetics where they show
ProXzir with Buccal Porcelain
ProXzir strength with porcelain on the facial surface only, and zirconia where the force is.
Ideal for: smile-zone crowns that still need to bite hard.
Esthetics above all
PFZ, Porcelain Fused to Zirconia
A zirconia core with hand-layered porcelain over the full visible surface: PFM esthetics without the metal.
Ideal for: anterior cases where esthetics lead.
Which ProXzir for which case
You know the tooth. Here is the tier.
| The case in your chair | Prescribe | Why |
|---|---|---|
| Heavy bruxer, any posterior | Full ProXzir | 1,400 MPa monolithic, nothing to chip |
| The molar that already cracked a crown | Full ProXzir | Maximum strength, lifetime warranty |
| Esthetic anterior or premolar, kept monolithic | Multilayered Zirconia | Natural gradient without porcelain risk |
| Smile-zone crown with a heavy bite | ProXzir with Buccal Porcelain | Porcelain on the facial, zirconia on the occlusal |
| Anterior where esthetics lead | PFZ | Hand-layered porcelain, PFM looks without metal |
| Mixed restorations on one arch | Any tiers combined | Same material family, shades match across the arch |
| Full or hybrid arch | Full ProXzir | Prescribe by case, single veneer to full hybrid arch |
Not sure which tier fits? Send the case and we'll recommend one before anything is milled.
Send your CaseWhat 1,400 MPa buys your patient
Most full-strength zirconia sits between 1,000 and 1,200 MPa; ProXzir is rated at 1,400. That margin is why we mill it monolithic for the heaviest cases, with no porcelain layer to chip, delaminate, or send the patient back to your chair.
ProXzir1,400 MPa
Typical full-strength zirconia1,000–1,200 MPa
It also means consistency. Because ProXzir is our own material, every restoration on an arch can come from one family, matched in shade and wearing alike over time. Where esthetics call for porcelain, the Buccal and PFZ tiers layer it over the same core.
Warrantied for life, certified by IdentCeram
Every ProXzir restoration carries our lifetime warranty, because we control it from block to finished restoration: milled, finished and quality-checked in our own lab, in IdentCeram-certified material.
1,400 MPa. Four tiers. One material family. Warrantied for life.
Where to find us
Have a question or need help with a case? Our team is ready to assist you